R1150GS 1998-2001 (KIT Q)
This is a complete stainless steel fastener kit suitable for all R1150GS 1998-2001 fitted with brembo front calipers.
List of parts and quantities included in the kit:
| FRONT SPINDLE PINCH BOLTS | 2 |
| FRONT MUDGUARD MOUNTING BOLTS | 2 |
| FRONT MUDGUARD BRIDGE BOLTS | 4 |
| HANDLEBAR CLAMP BOLTS | 4 |
| CALIPER MOUNTING BOLTS | 4 |
| ABS RING BOLTS | 5 |
| CALIPER BOLTS | 8 |
| FRONT DISC MOUNTING BOLTS | 10 |
| BRAKE PIPE BRACKET | 2 |
| SCREEN ADJUSTING SCREWS | 4 |
| FAIRING FRONT PANEL | 2 |
| FRONT PLASTIC TIMING COVER BOLTS | 4 |
| ENGINE TIMING COVER BOLTS | 14 |
| ROCKER COVER PROTECTION BARS | 6 |
| CAMSHAFT PLASTIC COVER BOLTS | 4 |
| INJECTOR MOUNTING BOLTS | 4 |
| STARTER MOTOR COVER BOLT | 1 |
| BELL HOUSING BOLT TOP | 2 |
| ENGINE MOUNTING BOLTS | 2 |
| TORQUE ARM BOLT TOP | 1 |
| TORQUE ARM BOLT REAR LOWER | 1 |
| FRONT AND REAR FOOTREST PIVOT PINS | 4 |
| DIFF SENSOR SWITCH BOLT | 1 |
| DIFF FILLER PLUG | 1 |
| GEARBOX FILLER AND DRAIN PLUG | 2 |
| REAR MUDGUARD HUGGER | 3 |
| REAR CALIPER MOUNTING BOLTS | 2 |
| REAR BRAKE MASTER CYLINDER MOUNTING BOLTS | 2 |
| FRONT FOOTREST MOUNTING BRACKET R/H | 3 |
| FRONT FOOTREST MOUNTING BRACKET L/H | 3 |
| REAR SUSPENSION PRELOAD CYLINDER MOUNTING BOLT | 1 |
| REAR FOOTREST MOUNTING BRACKETS | 4 |
| PANNIER FRAME MOUNTING BOLTS | 6 |
| GRAB HANDLE MOUNTING BOLTS | 2 |
| SILENCER MOUNTING BOLT | 1 |
| BRAKE LEVER PIVOT BOLT | 1 |
| ALL BOLTS ARE SUPPLIED WITH NUTS AND WASHERS WHERE NEEDED |
£175.00
