R80GS R100GS 1987-1995 (KIT J)
This is a complete stainless steel fastener kit suitable for all:
R80GS, R100GS, R80GS PD & R100GS PD 1987-1995
List of parts and quantities included in the kit:
| CLUTCH / BRAKE LEVER PIVOT PIN AND NUT | 2 |
| BRAKE CALIPER MOUNTING BOLT AND WASHER | 2 |
| BRAKE CALIPER BOLT | 2 |
| FRONT SPINDLE WASHER | 1 |
| FRONT SPINDLE BOLT | 1 |
| FRONT SPINDLE PINCH BOLT AND WASHER | 4 |
| FRONT FORK BRIDGE BOLTS | 4 |
| FRONT DISC MOUNTING BOLT | 4 |
| TWISTGRIP TOP SCREW | 1 |
| HEADLIGHT MOUNTING BRACKET BOLTS | 2 |
| FRONT FORK PINCH BOLTS TOP | 2 |
| FRONT FORK PINCH BOLTS BOTTOM | 4 |
| HANDLEBAR CLAMP BOLTS | 4 |
| BREMBO BRAKE CALIPER PINS | 2 |
| FRONT BRAKE MASTER CYLINDER SCREWS | 3 |
| ENGINE PROTECTION BAR KIT | 1 |
| TIMING COVER SCREWS INNER | 4 |
| TIMING COVER SCREWS OUTER | 2 |
| OIL COOLER MOUNTING KIT | 1 |
| ROCKET BOX KIT | 2 |
| CARB TOP COVER SCREWS | 4 |
| CLUTCH HOUSING BOLTS | 2 |
| SUMP BOLTS | 18 |
| GEARBOX END COVER BOLTS | 9 |
| OIL FILTER COVER BOLTS | 3 |
| CLUTCH ARM PIVOT BOLT | 1 |
| FRONT FOOTREST MOUNTING BOLTS | 2 |
| SUB FRAME BOLTS | 2 |
| REAR FOOTREST PIVOT PIN | 2 |
| REAR FOOTREST MOUNTING BOLTS | 2 |
| SHOCK ABSORBER TOP BOLT | 1 |
| SHOCK ABSORBER BOTTOM NUT AND WASHER | 1 |
| GRAB RAIL BOLTS | 4 |
| REAR INDICATOR MOUNTING BOLTS | 2 |
| SILENCER MOUNTING BOLTS | 3 |
| REAR BRAKE ADJUSTING SPINDLE | 1 |
| REAR BRAKE ADJUSTING NUT | 1 |
| REAR BRAKE ARM CLAMP SCREW | 1 |
| SUBFRAME TO MUDGUARD BRACKET BOLTS | 2 |
| ENGINE MOUNTING NUTS AND WASHERS | 4 |
| TORQUE ARM LOWER BOLT AND NYLOC NUT | 1 |
| GEARBOX / FINAL DRIVE FILLER PLUGS | 2 |
| GEARBOX / FINAL DRIVE DRAIN PLUGS | 2 |
| ALL BOLTS ARE SUPPLIED WITH NUTS AND WASHERS WHERE NEEDED |
£195.00
